S.NO |
Project Title |
Project Abstract/Objective |
Project Duration |
Estimated cost
(Rupees in Lakhs) |
1 |
A Hybrid Compression Technique for 2D ultra Sound images in Tele medicine
|
|
2 Years |
3.36 |
2 |
Development of Particle Swarm Intelligence based multicast routing algorithm for Mobile Ad hoc Networks(MANETs)
|
 Optimal Route Selection is very challenging in MANETs due to the random mobility of nodes and lack of redundancy in multicast structures. We attempt to propose a new Particle Swarm Optimization(PSO) based On Demand Multicast routing protocol(ODMRP) for optimizing the route selection for transmission of messages. This intelligent algorithm would be well suited for MANETs.
|
2 Years |
4.50
|
3 |
Analysis Of Deep Hole Drilling In
Al-SiCp Using Electro Chemical Machining.
|
For deep hole drilling there are two specialised techniques of ECM. These are
(i) Shaped Tube Electrolytic machining (STEM)
(ii) Capillary Drilling (CD).
|
3 years |
58.88 |
4 |
Characteristic Modification of Control Valve.
|
In Process Plants, Control Valves are used to control pressure, flow, level etc.
The Characteristics of the control valves are of two different types:
i. Linear Characteristic
ii. Non-linear Characteristic
It is easy to manufacture valve seat & plug for linear valves
|
6 months |
0.50
|
5 |
Development of Chemical Sensors for flu - gases
|
It is planned to develop Chemical sensors for measurement of the above gases.
The chemical or the combination of chemicals which changes its physical property like conductance or capacitance (any other property) by adsorption or absorption of the above gases can be processed by electronic circuits.
Apart from continuous indication of the gases, the signal so obtained will be compared with set point for generation of alarm to alert the operator
|
2 Years |
3.00 |
6 |
Brushless motors of high torque for robotics
|
Present DC motors have brushes which needs maintenance. Also the core is made of cold rolled silicon steel which saturates at magnetic flux density of around o.6 webers/m2. so It is planned to develop brushless DC motors with ferrite core which will not saturate even at two to three times the magnetic flux density saturation of silicon steel. With the use of ferrite core, high torque can be obtained. The supply voltage for the proposed motors will be in the range of 9 to 12 volts DC maximum. This can find application in the robotics and in many applications.
|
1 Year |
0.50 |
7 |
Mobile Cell Charger |
Presently the mobiles phones are charged with additional charger unit with ac supply.
It is planned to charge these mobiles using solar power which convert sun light in to electricity or piezo-electric crystals which convert vibration (Speech) in to electricity.
Planned to mount small solar cells or piezo- electric crystals at the back of the mobile. The converted electricity may charge the battery of the mobile.
|
1 Year |
00.30
|
8 |
Updating of Bank Pass book |
Like withdrawing the rupees from ATM machine, it is planned to update the bank pass book.
Thermal/ laser printer will be developed to suit the existing pass book for updating. On completion of particular page, instruction will appear on the screen for turning the page. Or special type of thermal paper of A4 size will be developed for updating the pass book. These sheets will be filed by the customer.
|
1 Year |
00.50 |
9 |
Next Generation Humanoid Robotic Weapon Suit for Secret Mitilary, Defence Agents and Spies
|
For defense , offence and safeguard the life of army personnel
To use advanced weapon systems.
Complete voice automated offensive systems with the help of robotic suit.
To monitor and assist them in their actions.
Easily locate them .
Kill the enemies without their knowledge.
Surveillance and evidence gathering.
Easy escape from a unexpected situation. |
1 Year |
5.00 |
10 |
Auto Implementation Of Defence System
|
Facilitates transfer of food items or goods items from one place to another area
Facilitate remote control for carrying out the intended purpose
|
3 Years |
17.00 |
11 |
Remote Controlled Mobile Platform
|
To provide alternate to similar human activities in both military and civil applications
Example: Spying in enemy territory and transmitting video and audio information
Convenience of remote control for the specific functions of the platform
continuous monitoring for the intended purpose
|
3 Years |
8.00
|
12 |
An Inteligent E-Portal on Information Technology Research flair out sourcing
|
To establish a ‘centre of excellence’ of Information Technology research to provide flexible support to expand and develop faculty research potential, to enhance research infrastructure and to institute discussion forum for mutual interaction and knowledge transfer with subject experts, industrialists, IT professionals, doctorates and researchers
|
3 Years |
18.75
|
13
|
Multi Mega - Watt Power Generation Onboard Aircrafts
|
The advent of directed energy weapons that propagate energy over large distances at the speed of light has created a new challenge for flight vehicles: the onboard generation of multi-megawatts of electric power.
The concept of a photo-fighter air superiority vehicle provides a point of departure for visions of an effective airborne electric power plant. In order to imagine the nature of possible electric power plant systems for hypersonic aircraft it is valuable to have some concrete goals to strive toward. Although the high energy laser on board the Airborne Laser (ABL) is a megawatt-class weapon it is basically a gas dynamic laser that operates very much like a rocket engine by combining energetic propellants in a nozzle and extracting the chemical energy released by the propellants in the flowing system.
The technology push is for developing a high power solid-state laser that converts electrical energy into coherent electromagnetic beams. Advances in the projected power from solid state lasers is continuing, and is now at the stage where tens of kilowatts can be regularly produced. However, for an effective weapon it is considered necessary to project at least 100 kilowatts. As a rule of thumb, the efficiency of conversion of conventional electric power to laser power is about 10%, so at least one megawatt of electricity must be available to the weapon system. The weapon will not be firing throughout the flight so the power system must be capable of rapidly building power to apply to the load demanded by the weapon
|
|
|
14 |
Perturbation of Magnetic Field by A.C. MHD Generator and suggestion for Power Factor Improvement for High Power Requirements for Directed Energy Weapons Onboard Hypersonic Aircrafts.
|
Estimation of perturbation of magnetic field, power densities and generator efficiency of Barbacsy’s scheme.
Comparison of the above with respect to the Two-Phase Liquid Metal MHD Induction Generator proposed by Yoichi FUJII-E , Masaki SAITO, Shoji INOUE and Tokuo SUITA.
Envisaging a new scheme by configuring 2 pairs of channels in an open –delta connection and estimating the above performance measures.
Suggestions for Power Factor Improvement of the scheme identified best amongst the above three alternatives.
|
|
|
15 |
High Frequency - (600) Hz lighting systems
|
To make the economical power consumption in lighting system by reducing the iron loss and copper loss of the chokes in the fluorescent and HDL lamps.
To reduce the weight, size of the chokes in the fluorescent and HDL lamps.
|
2 Years |
21.93 |
